Request Your Service

 

 

Everybody has got their own opinion involving What Would Cause My Electric Water Heater to Stop Working?.

Many contemporary houses make use of an electric hot water heater for their heating system, because of its ease and convenience of use. Nonetheless, just like any other electric devices, problems might emerge with its usage, all of a sudden. It can be really aggravating to get up to a cool shower instead of a hot one or having your bathroom with water that isn't warm enough and even as well warm. Whatever the case may be, water heater issues can be fairly stressful. The good news is, we've made a listing of feasible solutions to your hot water heater concerns. There are a number of aspects that can cause much of these troubles, it could be an issue with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you shut off the major power supply for safety. Whatever the issue is, getting it dealt with need to not posture too much of an issue if you comply with these actions:

 

Examine Your Power Supply:

As basic as this may seem, it is extremely essential. Without adequate power, your water heater will certainly not operate. So the first thing to do when your water suddenly stops working is to verify that it isn't a power issue. Examine if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the issue, just turn it on and off once more. Change any broken or worn-out fuse. Evaluate the home appliance with power after these modifications to see if it's currently functioning.

 

Examine the Heating Element in the Water Heater:

If it's not a power problem, then try taking a look at your heating element if it is still working. Evaluate each of your heating elements to make sure the issue isn't with any of them. If any of them is malfunctioning, replace that part and after that inspect whether the hot water is back on.

 

Inspect Your Thermostat:

If your water heater still isn't working or the water coming out isn't hot enough, you may need to check the temperature settings on your upper thermostat. Ensure the circuit breaker is switched off before doing anything. Open up the accessibility panel and also press the red switch for temperature level reset over the thermostat. This must assist heat up the water. Turn the circuit breaker back on and check if the problem has actually been solved.

 

Call An Expert:

If after replacing all damaged components as well as resetting your temperature, the hot water heater still isn't functioning, you may need to speak to a professional plumber for a professional point of view. The issue with your heater could be that the hot and cold faucets have actually been changed or it may be undersized for the amount of warm water required in your home. Whatever the case might be, a specialist plumber would aid address the issue.

 

Final thought

Water heater troubles are not constantly major. A lot of them result from small problems like a blown fuse or worn-out burner. Changing the defective parts need to work. However, if you are still incapable to fix the issue, give a call to your nearest plumber ahead to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I hope you enjoyed our section about How to Troubleshoot and Repair an Electric Water Heater. Thanks so much for taking time to read through our posting. In case you enjoyed our blog post plz remember to pass it around. Thanks a lot for your time spent reading it.

Book A Free Estimate